Banggood DW EPP Eagle - Build and Maiden. RC Helicopters | Radio Control Scale Models, RC Helicopters For Sale | Buy Remote Control Helicopter

TOP BEST RC Helicopters

Online social commentary (media commentary):

G'day All, Well here is something a little different and really just a bit of fun. Over Christmas, I picked up an EPP Eagle on sale from Banggood. I ordered the Eagle along with their recommended motor and ESC, but I had a message from Banggood to tell me they are out of stock of the ESC, but I could select an alternative. So, being too keen to wait, I made a selection and the gear arrived a week or so after. Here is the build and the failed maiden. The suggested CG of 70mm in the instructions is completely wrong, way too far back.

I got mine here -

Originally ordered this ESC - https://goo.gl/pdC57J Switched to this one - https://goo.gl/9WcFjW Racerstar BR2212 1000kv Motor - https://goo.gl/h70Ru4 MG90S Metal Gear Sevro - https://goo.gl/xu4WbZ EPP Mini Eagle - https://goo.gl/I9s6M6

The nose section has been reinforced now and it will fly again. Maybe tomorrow, probably the next day.

Cheers Michael

I agree with EC White. I also added downtrust (3 washers) and moved battery (3S 1800 MaH) just behind the motor. Flies like a bird now
"I maidened mine yesterday. 40mm CG, thin ply all the way to mtr mount, 1400KV motor, right and down thrust, flew right out of my hand. I couldn't tell which way was fwd on the ply sides. I think the way with the servos more rearward would be best as a 2200 3s could be placed farther back, but the 1500 3s is fine at about 1"" in front of the servos with esc up front and rx in back. I had to cut some small cooling holes on the bottom front and rear as well. Here is a link to my 2nd flite-I was surrounded by a bunch of hawks! Then when I was landing, as I cut power the tail feathers lost authority and it hit my legs. I was glad I had the ply in the nose!
https://www.youtube.com/watch?v=49O9QJbnG5g&feature=youtu.be"
I had to add down thrust to the motor and move the battery forward to get mine flying correctly.
Mine had 2 issues, first moving the battery forward corrected the glide/power-off flight. However with just about any amount of throttle it climbed like it was tail heavy. Down thrust on the motor fixed that. BTW, last summer I was flying several hundred feet up, when a hawk attacked and actually hit it. That was really cool to see.
"My 2nd flite, surrounded by hawks and it hits me at the landing!
https://www.youtube.com/watch?v=49O9QJbnG5g&feature=youtu.be"
Maybe a way to avoid drone regulation..?
Michael you will need 2-3mm of reflex with a v tail at 90 deg this model is essentialy a flying wing good luck
Voc¨ºs venderia ela pronta pra v?o?
50mm ok