GEL BALLS (ORBEEZ)
The included gel balls should be soaked in water for 3 to 4 hours, after which they will expand. When the gel balls are fully expanded you can fill up the magazine and shoot! ECO-FRIENDLY
Gel Blasters use water-based gel balls as ammunition. These gel balls will burst on impact and then dissolve by themselves. Good for the environment and easy for you, since you doní»t have to clean up anything yourself! This gives you even more time to play. SAFETY
Because Gel Blasters shoots gel balls that consist 95% of water, you doní»t have to worry about bruises. The gel balls will shatter on impact and leave no damage behind. It is still very important not to aim at others and to always wear safety goggles. These goggles are supplied standard with all of our Gel Blasters.
This gel fight gel ball blaster is made based on the cyperpunk 2077 quasar dr-12 revolver.
Cool science fiction outlook and bullpup design.
Hard nylon made with mag prime , safety switch and alloy barrel.
Two fire modes available: semi-auto and fully automatic.
Fire mode: semi-auto / full automatic
Battey type: sm-plug lipo
Ammo type: 7-8mm gel balls
Color: Blue; Desert Yellow; Black
Weight: around 900g
Shooting range: 15-20m
Rate of fire: 12 RPS
Firepower: up to 170 FPS
1x dr-12 quasar gel ball blaster
1x 7.4v lipo battery w/ USB charger
1x pack of water beads
1x safety glasses
1x manual book
-Recommended for ages 14 and above
-Charge the battery for at least 4 hours
-Soak your gel balls for 4 hours or more for maximum hydration
-Doní»t fire at people or animals
-Please wear safety protective google when using
-After shooting, remove the battery to save power and leak the battery.
-Please do not modify it as we do not cover configuration of the default set.
** Colors may look differently on individual monitor due to the color setting and lighting etc.**
SOAKING GEL BALL PROCESS REQUIREMENT
1. Pack of Gel Balls
GEL BALL / WATER RATIO
10,000 / 4L Water
5,000 / 2L Water
500 / 300ml Water
Step 1: Empty the gel ball pack into bucket
Step 2: Fill bucket with water (the more the better)
Step 3: Allow gel ball to soak for 4 hours minimum! (overnight recommended!!)
Your gel balls are now ready to use.