Esky Belt CP V2 *CNC Carbon Edition* RC Helicopter RTF. RC Helicopters | Radio Control Scale Models, RC Helicopters For Sale | Buy Remote Control Helicopter

Online social commentary (media commentary):

the v2 carbon edition is fully loaded with everything like cnc parts, carbon fiber blades, carbon fiber body, 2.4ghz, new gyro, and slight changes in design
this is a good heli, 4 months without any problems, and i fly it at least 30 mins each day, i have the regular non carbon fiber version tho.
I started with this heli, put many hours on it, when I bought an along 450 I realized that the belt cp V2,was much harder to fly and very unstable. skip this get a quality kit. this is a toy.
"Actually, if you know the basic !
It`s more easy to LEARN on the Belt CP v2.
Because of it`s stable handling in air !!
And the HH gyro is very good !

I have had mine 3 weeks now, flying everyday, and not ONE crash yet :-)

and it`s 2 years since last time I own a heli.."
I have this heli and i really love him
@WeLoVeTeChNoBoY2010 It is all through practice, practice, practice =) We know that in no time, through a lot of patience and experience, you will be a pro at 3D flying! Have someone who is experienced fly with you, check out our tutorial videos that we make for our great hobbyists.
I strongly recommend that you Fly a 4ch fixed pitch helicopter such as the Madhawk as they are similar to maneuverability. You will learn coordination and this should save you time and money on spare parts
nice vid mate what software did you use to edit it?
The Blu Ray is pretty nice. We're doing a tutorial for it soon on how to put it together and how to fly 3D. It'll be on this channel and you can also check for it at rcdiscuss . com/blog
could this heli lift 167grams of weight?
If you are a beginner I suggest gettin a 3 or 4ch helicopter to start off. The belt cp is a great choice, but is extremely difficult for a beginner. If you are looking for a great helicopter under $150 consider the Blazing Star. This is a great addition to starters and is unbelievably stable to fly.
Just purchased this last night cant wait to start flying pro style haha
"It can fly higher than 500 feet, but it depends on the weather condition. I don't recommend flying extremely high in windy conditions.
-Teddy from rcdiscuss . com"
Depending on your level of skills you won't need to replace any parts unless you crash
"@xhelicopter How long can the helicopter fly ??
And how much range ??"
the idle up switch, this locks the engine at 95% and also changes the pitch so that mid stick is 0, top stick is posetive 10, and bottom stick is negetive 10 pitch in the blades.
I recommend that you give our tech support a call, if its still in warranty they can issue you any part if defective
Oh so cool! Very fancy, I like!
"I have a walkera lama 2 coaxle helicopter :p its my first. im waiting for prices to go down and im gunna see what helis there are out there.

Ive heard that that Trex series are the easiest to control :p

its speedstacking not speedskating lol and i havent done it in a LONGGGG Time :)"
how much will the helicopter break and does it matter how you actually fly it?
Currently Xheli is the only store with inventory of the new Belt Cps
"I would like to get some opinions here :S
I never had an heli before (only the tiny PicooZ, smallest in the world) but I'm getting one soon.
I am very inteested in this one, but I know 6ch is too much for a beginner...
However, some sites advertise that this model e ""from beginners to experts"" , and that it's more stable than usual 6ch.
I don't want to keep my life buying better helis, so do you think I could handle this beast with careful, patience and time? Or is it impossible for a noob?"
"damn im just gettin the belt cp v1 for xmas...

what does this one have over it??"
I have the V1 and i like it. Esky mades really good RC Helicopters. Not so fuckin expensive like Align but the same fun in the air!
is this flight with the stock gyro?
ca c'est de la video ! super bien faite, qui peut faire mieux?
It looks good, I have the V1 and also a Trex. Undoubtedly the Trex is in a different class. This wont be a ptach on it. That said my Belt CP V1 is great fun, this video doesnt do it justice at all, much more 3d possible than this shows which is a shame. Slow roll rate and sloppy cyclic will no doubt still be an issue. If you want something really good the Trex is a no brainer.
There are two versions. You probably saw the upgraded carbon version
Yes both belt cps' were flown out of the box no special mods necessary
there are many sellers in germany. and i think in holland there are the same chargers so u can buy one from german shops
Not too sure about technical problems on this model. Try asking in the Rc forums such as RCdiscuss or RCuniverse. They should have users who have more experience with the Belt Cp v2
Thats because align is the best you can buy..like the trex it might be expensive but its worth it
"Very nice professional video! But I found a goofup at 0:26.

The footage at this time shows a completely different helicopter. Looks like a Bluray or a Legend."
what would be a good beginner 3D heli under 300 dollars?
what is the best helicopter battery?
"Can someone answer me this,how does it fly upside down? do the rotor blades reverse the normal angle,thats the only way i can see it happening.
is this heli on this video a good one to start out with? I dont want junk, i love billet parts so its upgradability is a must!
I just sold my Unlimited Engineering billet emaxx for 3000! dam UE parts are worth a fortune now! now i want a heli! but i dont want to run into the same prob, Unlimited Engineering stopped making the parts so no support!
Thanks"
@shebotnov. They arnt painted they are anodised purple. So the metal is actualy purple.. No paint on them. But i agree they could do a choice of colours. Id like some silver ones. Would look nice
What was the spinning thing underneath it? the purple thing.
"All of his videos look like they're fresh of of the VideoCopilot tutorial line.
If that's true (seems like it) then he's using Adobe AfterEffects."
is that heli is able to lift up go pro camera?
I think I buy one! the Price is veeerry good!
I believe it should be able to handle that weight
bro, at 0:26 i could c the location of the motor somewhat differ from the normal esky location. I didn't see the blue motor in the pics of this heli as well. Could you tell me what that is or is it a totally different chassis
what do you think a good helicopter is for under 150$. thanks!
Its on sale at our website
I'm considering buying this.
@rlseuro But you dont learn to drive in a ferarri ;-) I learned on a belt cp V2, and for learning it was ideal because it was cheap. The belt has its place, as does the trex 450. A beginner would also be stripping the torque tube gears on the pro every flight. So no, the pro isnt suitable for that job. The sport would be better out of the trex's ;-)
yes but its a good, cheap heli to learn on
this is so cool......;D
@heberorozco you would be looking into a 450size heli such as a T-rex or Blueray450
wow big video copilot fan ;D
do i get a charger that works in holland i like this one more than a trex 450
hmm im also thinking of buying the walkera 4g6 micro 3D helicopter with a shaft drive tail rotor.. its over 300 dollars... but i also have 3 600MaH 1s lipos that will work with it.. from helipaldotcom
its belt cp v2 good heli for smal wind
"belt cp v2....is recommended if you ...
have fly and have master 4 channel...
and it normally have been use to all beginner...the control more complicated then
4 channel heli..so i recommended if you want to start playing heli it better that u play it on simulator first...buy a goo d simulator :D"
Its Belt cp v2 god helicopter for smal wind
"Just post my first flight with the belt cp v2 from Xheli.
I'm new in RC helicopter, after 1 crash the second day, 2 weeks of simu waiting for spare parts. See how it flight.

Bye"
Which is better Honey bee King V3 or Belt CP V2????
Im not experienced and i always cut off power before hitting the ground..
its just the way it dose that just counter act that or get a good heli like a t rex 600 it dosent do that. HAH or a t rex 450 but i have a 600 esp its huge but flys amazing